3 phase pad mounted transformer ANSI IEEE Standard Three phase 5000Kva 13800V To 4160V
Three phase pad mounted transformers come in two basic configurations: Radial and Loop feed, which are selected based on the type of circuit on which the transformers will be installed.The 3 phase pad mounted transformer uses aluminum or copper winding and is optimized to maximize efficiency and footprint.
Three phase pad mounted transformers are designed and manufactured to comply with ANSI, DOE, IEEE, CSA and IEC standards. With high voltages up to 34.5kV and ratings up to 10MVA. It can be single voltage or dual voltage.
STRUCTURE
Main data
| Transformer Type | Pad Mounted, Compartmental-Type |
| Transformer Configuration | Liquid Filled Pad Mounted |
| Transformer Feed Type | Loop Feed |
| Phase | Three Phase |
| Capacity | 5 MVA (5000 KVA) |
| Primary Voltage | 13800V |
| Primary Voltage Class | 25 kV Class |
| Primary BIL | 125 KV |
| Secondary Voltage | 4160V |
| Secondary Voltage Class | 5 kV Class |
| Secondary BIL | 60 KV |
| Frequency | 60 Hz |
| Temperature Rise | 65°C |
| Insulation Rating | Class E Insulation - 120°C, 248°F |
| Cooling Class | KNAN; Self-Cooled |
| Impedance (Typical) | 5.0-7.5% |
| Efficiency Standard(s) | Meets DOE 2016 Standards, Meets ANSI/IEEE Standards |
| K-Factor Rating (Harmonic Mitigation) | K-1 (Standard) |
| Pulse Drive Rating | N/A |
| Insulation Fluid | Biodegradable Natural Vegetable Oil Ester Insulating Fluid - Non-PCB Fluid |
| Fluid (Oil) Capacity* | 700 Gallons |
| Fluid (Oil) Weight* | 5,390 Lbs |
| Winding Material | Copper |
| Ambient Temperature Rating | 40°C |
| Sound Level | 65 dBA |
| Tank Material | Coated Steel |
| Dimensions* | 96''-W x 108''-D x 94''-H |
| Dry Weight (w/o Oil)* | 10,462 Lbs |
| Ratings | |
| Meets/Exceeds DOE 2016 Efficiency Ratings | |
| Complies with ANSI / IEEE C57.12.00 | |
| Efficiency % | 98.20% |
| No Load Loss (in watts)) | +/- 8,889W |
| Full Load Loss (in watts) at 100% | +/- 34,996W |
Specification
| Three Phase Pad Mounted Transformer |
| Rated Power (KVA) | High Voltage (KV) | Low Voltage (V) | Loss (W) |
| No-load Loss (W) | On-load Loss (W) |
| 75KVA | 24.94/14.4kV
12.47/7.2kV
34.5KV/
19.92KV/
13.8KV/
13.2KV/
or others | 120/240V
480Y/
277V
600Y/
347V | 180 | 1250 |
| 112.5KVA | 200 | 1500 |
| 150KVA | 280 | 2200 |
| 225KVA | 400 | 3050 |
| 300KVA | 480 | 3650 |
| 500KVA | 680 | 5100 |
| 750KVA | 980 | 7500 |
| 1000KVA | 1150 | 10300 |
| 1500KVA | 1640 | 14500 |
| 2000KVA | 2160 | 20645 |
| 2500KVA | 2680 | 23786 |
| 3000KVA | 3300 | 25300 |
| 3750KVA | 4125 | 27875 |
| 5000KVA | 5200 | 30000 |
Technical drawings
Description:
1)The structure is compact and reasonable, and the volume is small, which is only about one-third of the European-style box change of the same capacity;
2)Fully sealed, fully insulated structure, no need to set up safety barriers, and reliable guarantee for personal safety;
3)There are a variety of power supply schemes for users to choose from, which can adopt terminal power supply and realize ring network or dual power supply;
4)S11 oil-immersed power transformer is adopted, which has low loss, low temperature rise and strong overload capacity;
5)Double fuses (backup protection fuse + plug-in fuse) are used for protection, and the plug-in fuse fuse has the current and temperature dual sensitivity characteristics to ensure the safe and reliable operation of the product;
6)The 200A cable connector can be plugged and unplugged under load, and can be operated as a load switch in an emergency. It also has the characteristics of an isolating switch.
7)The winding adopts Dyn11 connection and the iron core adopts a three-phase four-column structure, so that the product can run under any asymmetric load, and the neutral point does not drift, the voltage is stable, the power supply quality is high, the cabinet heats up, the noise is low, and the lightning protection performance is good ；
8)The cabinet adopts anti-corrosion design and special spray paint treatment, beautiful and novel, suitable for various environments, and achieve the effect of beautifying the city.
Production process
FAQ
1. Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
2. Q: What is the lead time?
A: Mass production time 15-25 days.
3. Q: How long is the warranty?
A: 24 monthes from B/L. If there are any accessory problems,just provide the photos of damaged accessory,then we will provide free service. According to the number of products,we will provide easily damaged accessories for free. we also can provide technical support if you need.
4. Q: Is OEM/ODM available?
A: Yes,it is! We are manufacturer with our own R&D team, we can customize products according to customer's drawing or requirements.
Customized services:
a. Customized color and special function.
b. Customized box.
c. Print customer's logo.
d. Your other ideas about product, we can help you design and put them into production. The above customized services must be confirmed before production.
5. Q: How to control the products quality?
A: Our company owns the core technology ,all kinds of products hold CE certificate. We have professional engineers. Workers are strictly required to make products according to the drawings. Each process has technical instructors.The QC supervisors will regularly inspect the production. We will do products performance tests during production, and comprehensive quality tests when the products is completed.
Product Tags:
|
|
3 Phase Pad Mounted Transformer ANSI IEEE Standard Three Phase 5000Kva 13800V To 4160V Images
|
